Skip to main content

Design of air compressors and pneumatic automation application setups

Compressed Air Controls provided Capital Precut with a pneumatic solution by refurbishing their framing table
Compressed Air Controls provided Capital Precut with a pneumatic solution by refurbishing their framing table.

Do you want to ensure your pneumatics and air compressors are reliable?

Then contact Compressed Air Controls to design a pneumatic automation application or air compressor setup. (We do not supply MAC Valves in Hawke's Bay.)

Our pneumatic automation application design process:

1. Contact us for an in-branch, on-site or virtual discussion

We have an open discussion to gain an understanding of your requirements and business needs/design concept ideas. This is can be over a coffee at one of our branches, via video conference, or at a location that suits you. During this initial consult, we will be able to give you a general indication of costs that you may incur. Here we will also let you know about our business and product offering so you are aware of all of our capabilities.

2. Site visit (if applicable) and concept brainstorm

We visit your site to see your application or what you want automated in action. This allows us to provide the best solution/concept options to suit your requirements, environment and equipment. Our team of experts then have a ‘think tank’ and come up with a concept idea or ideas that should meet your requirements. We then present these with you and give an idea of the costs to get the concept built. 

3. Scope of work defined- this can be broken down and completed in cost-effective stages

If agreed, we define the scope of work which includes a more specific indication of costs, identifies roles and responsibilities in the process (including if there is an agreement with external parties such as fabricators or electricians). 

4. Prototype developed, built and tested

We ensure that it will meet your requirements. 

5. Solution testing and integration

We install into site/application and undertake the commissioning and testing until we are happy that it has provided the outcome you are after. We project manage the build and will coordinate the other trades around it. 

If you have been wondering about automating an operation, whether it is to improve safety or to help streamline a process, get in touch with us for a no-obligation chat today. 

Compressed Air Controls installed an Oilrite system.

The benefits to automating processes:

  • Make life easier: Manually lubricating the chain that moves meat around the Alliance meat processing plant in Dannevirke was an awkward task for staff. Now the task does not require anything more than a push of a button, thanks to Compressed Air Controls automating the process. Compressed Air Controls installed an Oilrite automated lubrication system that has 12 outlets.
  • Reliability: An old, unreliable machine running on logic controls can be upgraded to include a modern controller, which will provide improved production and reliability. This is all for a fraction of the cost of a replacement machine.
  • Compressor breakdowns can be a sign that the system needs to be upgraded. We recently did some pneumatic automation upgrades to a power station's pneumatics using our MAC valves and Master Pneumatic filter/lubricator sets and Air Torque actuators, as the original installation had no isolation or lubrication to the pneumatic control actuator/butterfly valves. We also serviced the compressor and now we are not having any more breakdown callouts at 2 am and the customer is wrapt that he can sleep soundly again.
  • Production bottlenecks can be eliminated.
  • Making staff safe i.e. using machines instead of staff in cold areas, like freezers, which reduced repetitive strain injury.  

Have you had a process pneumatically automated by us? Leave us a review.

Contact us now to see how pneumatic automation can make your life easier.

Compressed Air Controls can design air compressor setups so the air compressor is not contaminatedame place, where contaminants caused the last one to fail, a Territory Manager designed a portable shed on a skid

Compressed Air Controls can design an air compressor setup in the right location with the right accessories

We also ensure:

Our air compressor and accessory setup process:

  • We visit your site to assess your needs by:
    • Reviewing your historical power consumption records, checking the load on pneumatic systems and counting the amount of equipment that needs compressed air. Such observations help determine the average airflow (CFM) and air pressure (bar) required for daily operations, the maximum possible demand and requirement during a low production phase.
    • Discussing your plans for future growth
    • Keeping this in line with your budget

Site assesments inform us on what hazardous materials to avoid locating the air compressor near 

A site visit lets us know how much space we have to work with and what hazardous materials are on-site. We will design the air compressor set up so it is not close to toxic or flammable materials or corrosive agents. When Stevensons Engineering needed to replace their air compressor, Compressed Air Controls did not install the new one in the same place, where contaminants caused the last one to fail; the Territory Manager designed a portable shed on a skid.

We follow industry best practice

It is industry best practive to protect the air compressor from the elements- if the site does not have room for the air compressor to be inside, then will we advise that a shed must be made for it.

Read more of our customer testimonials about our pneumatic and air compressor solutions.

Once we have designed the air compressor setup, we supply, install and service the air compressor, accessories and pneuamtics

Contact us today for your air compressor and pneumatic design needs